Course syllabus

Course-PM

ENM071 ENM071 Applied power electronics: Devices and implementations lp4 VT24 (7.5 hp)

Course is offered by the department of Electrical Engineering

Contact details

List of...

• examiner
• lecturer
• teachers
• supervisors

...along with their contact details. If the course have external guest lecturers or such, give a brief description of their role and the company or similar they represent.

If needed, list administrative staff, along with their contact details.

Course purpose

Short description of the course purpose and content: can be copied from syllabus in Studieportalen. Additional information can be added.

Schedule

TimeEdit

Course literature

List all mandatory literature, including descriptions of how to access the texts (e.g. Cremona, Chalmers Library, links).

Also list reference literature, further reading, and other non-mandatory texts.

Course design

Description of the course's learning activities; how they are implemented and how they are connected. This is the student's guide to navigating the course. Do not forget to give the student advice on how to learn as much as possible based on the pedagogy you have chosen. Often, you may need to emphasize concrete things like how often they should enter the learning space on the learning platform, how different issues are shared between supervisors, etc.

Provide a plan for

• lectures
• exervises
• laboratory work
• projects
• supervision
• feedback
• seminars

Should contain a description of how the digital tools (Canvas and others) should be used and how they are organized, as well as how communication between teachers and students takes place (Canvas, e-mail, other).

Do not forget to describe any resources that students need to use, such as lab equipment, studios, workshops, physical or digital materials.

You should be clear how missed deadlines and revisions are handled.

Changes made since the last occasion

A summary of changes made since the last occasion.

Learning objectives and syllabus

Learning objectives:

Describe turn-on and turn-off transients of a MOSFET using equivalent circuit models.
Design drive circuits for MOSFET and IGBT transistors, for driving and condition monitoring.
Describe how turn-on, turn-off and overvoltage snubber circuits are designed and how they operate.
Calculate component values for turn-on, turn-off and overvoltage snubbers based on circuit requirements.
Analyze the oscillations over a switching component in a real circuit and design a snubber circuit that reduces the oscillations. The improvements are also to be implemented on a real circuit.
Theoretically describe the function of a control circuit for a dc/dc-converter. Design and practically put a control circuit into operation and determine suitable component values in order to obtain voltage regulation, current mode control and over-current protection.
Calculate the current and voltage wave-forms in load-resonant (SLR), zero-voltage swtiching (ZVS) and zero-current switching(ZCS) resonant converters with the knowledge of initial current and voltage values.
Describe important aspects regarding power quality/EMI/EMC such as requirements, propagation, generation, effect and mitigation, as well as how to conduct measurements in such an environment.
Perform simplified calculations on how inductively and capacitively coupled disturbances propagate from source to victim.
Describe how a diode, thyristor, GTO, BJT, IGBT, IGCT and a MOSFET are designed and how they operate.
Describe and conduct base calculations on different PFC circuit as well as isolated dc/dc converters such as the DAB and the current doubler.
Conduct thermal calculations on passive and active components.
Make base life-time calculations based on temperature profiles.
Describe inverters for drive systems and grid connected applications. Conduct loss calculations and describe the impact on the dc-link capacitor as well as surrounding components.
Describe the usage of energy storage systems (e.g. batteries and supercapacitors) in power electronic applications.
From an engineering point of view, be able to identity and select suitable components so that the demands are satisfied for the analyzed converter with respect to e.g. size and losses.

Link to the syllabus on Studieportalen.

Study plan

If the course is a joint course (Chalmers and Göteborgs Universitet) you should link to both syllabus (Chalmers and Göteborgs Universitet).

Examination form

Description of how the examination – written examinations and other – is executed and assessed.

Include:

• what components are included, the purpose of these, and how they contribute to the learning objectives
• how compulsory and/or voluntary components contribute to the final grade
• grading limits and any other requirements for all forms of examination in order to pass the course (compulsory components)
• examination form, e.g. if the examination is conducted as a digital examination

• time and place of examination, both written exams and other exams such as project presentations
• aids permitted during examinations, as well as which markings, indexes and notes in aids are permitted

Do not forget to be extra clear with project assignments; what is the problem, what should be done, what is the expected result, and how should this result be reported. Details such as templates for project reports, what happens at missed deadlines etc. are extra important to include.